China bending machine

We are a professional manufacturer of bending machine equipment with over 10 years of industry experience. Today, we would like to introduce to you:
During the use of the China bending machine, sometimes there may be overburning, which not only affects the normal operation of the equipment, but may also have adverse effects on production efficiency and product quality. To effectively avoid overheating of the bending machine, the following aspects can be taken into account:
一、 Equipment status and maintenance
1. Ensure that the mechanical transmission system is functioning properly:
The mechanical transmission system should operate smoothly without abnormal noise, and the braking should be sensitive and reliable. Gear transmission, electrical, and hydraulic components should not emit irregular impact sounds or periodic sharp noises during operation.
2. Check hydraulic components and pipelines:

Hydraulic components and pipelines should have no leakage phenomenon. The actions of each component in the hydraulic transmission system should be sensitive and reliable, and the system pressure should meet the requirements.

3. Noise and temperature control:
The noise pressure level of the bending machine during air operation shall not exceed the specified value (such as 90dB). When the hydraulic transmission system is working, the oil temperature in the oil tank should not exceed the set upper limit (such as 50 ℃), and the oil temperature after continuous full load operation should not exceed the allowable range (such as 60 ℃).
二、 Operating standards and stress management
1. Standardized operation:
During the operation, it is necessary to strictly follow the equipment manual and operating procedures. Avoid equipment damage caused by excessive use or improper operation.
2. Stress management:
During the production process, the pressure of the bending machine should be strictly controlled to avoid significant fluctuations. Excessive pressure can lead to heat accumulation, thereby increasing the risk of overburning.
三、 Component wear and lubrication
1. Check for component wear:
Regularly inspect the wear of the rollers, idlers, and other components of the bending machine. For components that have already experienced wear, they should be replaced in a timely manner to avoid overburning caused by increased friction.
2. Strengthen lubrication:
Strengthen lubrication of the bending machine to reduce friction between components. Use appropriate lubricants and ensure that the lubrication system is functioning properly.
四、 Electrical and Selection Management
1. Stable power supply voltage:
Ensure the stability of the power supply voltage of the bending machine to avoid equipment overheating and damage caused by low or high voltage.
2. Selection and matching:
Choose the appropriate motor form based on actual load conditions to avoid equipment damage caused by improper selection.
In summary, by ensuring that the equipment is in good condition, operating in a standardized manner, managing pressure, checking component wear and strengthening lubrication, and managing electrical and selection, it is possible to effectively avoid overheating of the bending machine. This can not only extend the service life of the equipment, but also improve production efficiency and product quality.
If you need or are interested in a bending machine, please feel free to contact us and we will provide a detailed introduction and quotation for suitable machines.