Flexible Laser Cutting Machine

We are a professional manufacturer of sheet flexible laser cutting machine with over 10 years of industry experience. Today, we would like to introduce to you:

The main reason for the production of leads in sheet  flexible laser cutting machines is to ensure the integrity of the cut parts and avoid defects. The appearance of long leads may be caused by the following reasons:

1. Excessive laser power: When the laser power is set too high, it may cause excessive burning or even burning through of the lead, resulting in the lead becoming too long. Therefore, when using a sheet laser cutting machine, the appropriate laser power should be selected based on the properties and hardness of the material.
2. Cutting speed too fast: If the cutting speed is set too fast, the laser irradiation time will be shortened, and some leads may be penetrated or broken by the laser before they are completely melted in the future. As the hole becomes larger, the lead will extend from the hole, forming an excessively long lead. Therefore, it is necessary to control the cutting speed to ensure sufficient laser irradiation time.
3. Inaccurate laser focusing: When the laser focusing point of the sheet metal laser cutting machine is coarse or the diameter is inaccurate, the melting edge of the lead may oscillate, causing the lead to extend. Ensuring the accuracy of the size and position of the laser focal point is the key to avoiding this problem.
4. Improper material selection: Using unsuitable materials for laser cutting may also result in excessively long leads. For example, when using aluminum with a lower melting point to cut copper leads, the aluminum may be melted first, affecting the cutting effect of the copper leads and causing them to become longer. Therefore, when selecting materials, it is necessary to make reasonable choices based on actual cutting needs.

5. Cutting head or process issues: Sometimes, the cutting head hole may jam the lead wire, causing deformation or excessive melting of the lead wire, resulting in excessively long leads. At this point, it may be necessary to improve the cutting process or replace the cutting head with a better one.

In summary, in order to avoid long leads in the  flexible laser cutting machine for sheet metal, it is necessary to comprehensively consider multiple factors such as laser power, cutting speed, laser focusing accuracy, material selection, and cutting head and process. By adjusting these parameters and conditions reasonably, the laser cutting machine can operate stably and effectively, and achieve satisfactory cutting results.

Obtain detailed machine parameters and quotation.