Hot Selling Plate Rolling Machine

We are a professional manufacturer of Hot selling plate rolling machine  with over 10 years of industry experience. Today, we would like to introduce to you:

The choice of motion mode for a Hot selling plate rolling machine mainly depends on factors such as processing requirements, plate type, equipment model, and operating habits. The following is a detailed analysis of the selection of the motion mode for the Hot selling plate rolling machine.

一、 The motion mode of the upper roller
1. Vertical lifting motion: The upper roller is vertically lifted and lowered through screw and worm drive or hydraulic drive, in order to clamp the plate and adjust the rolling radius. Widely used for rolling various types of boards, especially when adjusting the rolling radius or clamping the board.
2. Tilting and lifting motion: In an asymmetric three roll plate rolling machine, the edge rollers can perform tilting and lifting motion, with dual functions of pre bending and coiling. Suitable for situations where pre bent plates or workpieces with special shapes (such as cones) need to be rolled.
二、 The movement mode of the lower roller
The lower roller rotates by meshing with the output gear of the reducer, providing torque for the rolled sheet. Widely used for rolling various types of boards, it is the basic motion mode of the rolling machine.
三、 Choose Suggestions
1. Choose according to processing requirements
If it is necessary to roll circular, curved or conical workpieces and high rolling accuracy and efficiency are required, an asymmetric three roll plate rolling machine with vertical lifting and tilting lifting motion functions can be selected. If only simple circular or curved workpieces need to be rolled and moderate rolling accuracy and efficiency are required, a symmetrical three roll plate rolling machine can be chosen.
2. Choose according to the type of board
For thicker or harder sheets, greater rolling force and more stable motion may be required, so a hydraulic three roll bending machine can be chosen. For thinner or softer sheets, a mechanical three roll bending machine may be more suitable because of its relatively simple structure and more affordable price.
3. Choose based on device model and operating habits

Different models of three roll bending machines may have different motion modes and operating interfaces. When choosing, the habits and proficiency of the operators should be fully considered to ensure that they can operate the equipment correctly and effectively. At the same time, factors such as equipment maintenance and upkeep costs, as well as after-sales service, should also be considered.

In summary, the selection of the motion mode of the Hot selling plate rolling machine should be comprehensively considered based on specific processing requirements, plate types, equipment models, and operating habits. When choosing, one should fully understand the performance characteristics, operating interface, and maintenance requirements of the equipment to ensure that they can select the equipment that suits their needs.

If you are interested in the Hot selling plate rolling machine, please contact us.