3 Roller Sheet Metal Plate Rolling Machine

We are a professional manufacturer of 3 roller sheet metal plate rolling machine with over 10 years of industry experience. Today, we would like to introduce to you:

3 roller sheet metal plate rolling machine is a processing equipment used to curl metal sheets into the desired shape. It uses mechanical force to cause plastic deformation of the sheet, thereby achieving bending and forming of the sheet. This type of equipment is widely used in industrial production, especially in industries such as boilers, shipbuilding, petroleum, and metal structures.

It mainly consists of the following parts:

1. Upper and lower rollers: These are important components of mechanical plate rolling machines, usually made of forged high-quality carbon steel, responsible for applying pressure to the plate and guiding its bending.
2. Rack: The rack is divided into left and right parts, with lower roller bearings installed inside and connected to the upper roller bearing seat through square buckle screws to ensure the vertical lifting and lowering movement of the upper roller.
3. Reducer: A hard toothed reducer is used in conjunction with a motor to drive the lower roller to rotate through gear transmission, providing the necessary torque for the mechanical bending machine.
4. Electrical part: including all electrical control components, usually installed in a control box for easy control by operators.
5. Unloading device: located on one side of the reducer, used to balance the upper roller during unloading, and complete unloading and recovery actions through an oil cylinder.

6. Base: Made of welded steel sections and plates, it supports the entire mechanical bending machine, making it a stable whole.

The working principle of a mechanical plate rolling machine is to move the working roller through hydraulic pressure or mechanical force, thereby bending or forming the sheet metal. Specifically, the upper roller of the mechanical plate rolling machine is symmetrically positioned at the center of the two lower rollers, and the hydraulic oil in the hydraulic cylinder acts on the piston to perform vertical lifting and lowering motion. At the same time, the final gear of the main reducer drives the meshing and rotating motion of the two lower roller gears. In this way, when a flat plastic metal plate passes between the three working rollers of the plate rolling machine, the metal plate is continuously bent through multiple passes by the downward pressure of the upper roller and the rotational motion of the lower roller, producing plastic deformation and being rolled into the required cylinder, cone or part thereof.

It is very common in industrial production and can be rolled to produce steel columns that meet the requirements. Almost all steel formed into cylindrical shapes is rolled by a plate rolling machine. Before operating the plate rolling machine, it is necessary to maintain the machine, carefully check whether the safety devices are intact and whether the power supply is connected to ensure the safety and effectiveness of the operation. In short, the mechanical plate rolling machine is an important metal sheet processing equipment. Through its complex structure and precise working principle, it can effectively roll metal sheets into various required shapes and is widely used in various industrial fields.

Obtain detailed parameters and quotation for the 3 roller sheet metal plate rolling machine.