Nitrogen filling pressure of shearing machine

We are a professional manufacturer of shearing machine equipment with over 10 years of industry experience. Today, we would like to introduce to you:

A shearing machine is a common industrial machinery equipment widely used for cutting and processing metal sheets. In order to ensure its normal operation and extend its service life, we need to fill a certain pressure of nitrogen gas during the operation of the shearing machine. So, what is the nitrogen filling pressure of the shearing machine? Here is our detailed explanation of the nitrogen pressure for the shearing machine:

1、 General range of nitrogen filling pressure for shearing machine

Normally, the nitrogen filling pressure of the shearing machine is between 0.6 and 0.8 Mpa. This pressure range has been carefully designed and tested to ensure that the shearing machine operates in an effective and stable state. However, this is only a rough range, and the specific nitrogen filling pressure depends on the model and manufacturer of the shearing machine.

2、 The Importance of Nitrogen Charging Pressure

The nitrogen filling pressure has a significant impact on the performance of the shearing machine. Reasonable nitrogen filling pressure can ensure that the shearing machine operates in an effective and stable state. If the nitrogen filling pressure is too high, it may cause excessive wear and tear of the equipment, and even lead to safety accidents; If the nitrogen filling pressure is too low, it will affect the cutting effect and efficiency of the shearing machine.

3、 Method for determining nitrogen filling pressure

When choosing the nitrogen filling pressure, it is recommended to refer to the user manual that comes with the shearing machine. The manual usually provides the appropriate range of nitrogen filling pressure. If you are unsure about the nitrogen filling pressure, you can consult the sales personnel or professional maintenance personnel of the shearing machine. They can provide suitable nitrogen filling pressure recommendations based on the model and actual working environment of the shearing machine.

4、 Nitrogen filling steps and precautions

1. Specific steps for nitrogen charging

(1) Find the nitrogen cylinder: First, locate the nitrogen cylinder of the hydraulic shearing machine and open the interface on it.

(2) Connect the high-pressure pipe: Use a high-pressure pipe to connect the nitrogen cylinder to the nitrogen cylinder.

(3) Adjust pressure: Open the valve on the nitrogen cylinder and adjust it to the desired pressure range.

(4) Close the valve: After nitrogen filling is completed, close the valve on the hydraulic shearing machine to prevent nitrogen leakage.

During the nitrogen filling process, the following precautions should be taken:

(1) Use high-purity nitrogen: Ensure that the nitrogen used has high purity to avoid damage to the equipment.

(2) Control nitrogen charging speed: Nitrogen charging should be carried out slowly to avoid pressure fluctuations caused by excessive speed.

(3) Regular inspection: Regularly check the sealing and pressure stability of the nitrogen system to ensure that the shearing machine can work properly.

In summary, understanding and setting the nitrogen filling pressure of the shearing machine reasonably is crucial for ensuring the normal operation of the equipment and extending its service life. In practical operation, the appropriate nitrogen filling pressure should be selected according to the specific situation, and relevant safety regulations should be strictly followed.

If you need or are interested in a shearing machine, please feel free to contact us and we will provide a detailed introduction and quotation for suitable machines.