Removable Hydraulic Plate Rolling Machine

We are a professional Removable hydraulic plate rolling machine manufacturer with over 10 years of industry experience. Today, we would like to introduce to you:

Removable hydraulic plate rolling machine is an important metal sheet processing equipment widely used in shipbuilding, petrochemicals, steel structures and other fields. It drives the working rollers through a hydraulic system to achieve continuous point bending and shaping of the sheet, thereby rolling it into the required cylinder, cone or other shapes. The replacement steps are as follows:

1. Preparation: Firstly, ensure that the hydraulic bending machine system is turned off and in a safe state. Remove the brake springs or screws at both ends to prevent accidents during operation.
2. Disassemble the guide sleeve: Release the guide sleeve of the hydraulic cylinder, which may be on both sides or one side, for subsequent operations.
3. Check and replace the sealing ring: Remove the old sealing ring and check if it is deformed or aged. If a problem is found, it can be softened by soaking in boiling water for 10 minutes, and then replaced with a new sealing ring. At the same time, ensure to replace the oil seal of the piston rod to maintain the sealing of the entire system.
4. Detail handling: When disassembling and installing the hydraulic bending machine, pay attention to observing the wear of the oil seal and emphasize the importance of operational details.
5. Choose the appropriate sealing ring material: Choose the appropriate sealing ring material according to the usage environment and working conditions. Common materials include rubber, polyurethane, etc. Rubber sealing rings are suitable for low-temperature environments, while polyurethane sealing rings are suitable for high-temperature environments.

6. Preventive measures: In order to extend the service life of the hydraulic cylinder, it is recommended to regularly check the condition of the sealing ring, replace aging and damaged sealing rings in a timely manner, and maintain the cleanliness and lubrication of the hydraulic plate rolling machine system.

By following the above steps and precautions, the Removable hydraulic plate rolling machine oil cylinder seal can be effectively replaced, ensuring the normal operation of the equipment and extending its service life.

If you need or are interested in Removable hydraulic plate rolling machine, please feel free to contact us and we will provide a detailed introduction and quotation for suitable machines.