CNC Multi Functional Plasma Cutting Machine

We are a professional manufacturer of CNC Multi functional plasma cutting machine with over 10 years of industry experience. Today, we would like to introduce to you:

The cutting speed of a CNC Multi functional plasma cutting machine refers to the speed at which the plasma arc moves during the cutting process. The faster the cutting speed of a CNC Multi functional plasma cutting machine, the higher the cutting efficiency, but the cutting quality may be affected. Therefore, it is necessary to adjust the cutting speed reasonably based on factors such as the type, thickness, and plasma arc power of the cutting material.

一、 Enter the manual operation interface
Firstly, it is necessary to turn on the power of the CNC plasma cutting machine and press the "manual" button to enter the manual operation interface. In this interface, you can observe the display of speed percentage, which is the basis for adjusting speed.
二、 Adjust cutting speed
1. Initial speed setting
Before using a CNC plasma cutting machine for cutting, it is necessary to first set the initial speed. The initial speed refers to the speed at which the cutting head starts moving from the surface of the material to be cut. Normally, the initial velocity should be set to 1/3 to 1/2 of the thickness of the material.
2. Adjust according to material type and thickness
Different types and thicknesses of materials require different cutting speeds from CNC plasma cutting machines. For example, for thinner metal sheets, the cutting speed should be appropriately increased, while for thicker materials, the cutting speed needs to be appropriately reduced. In practical operation, adjustments can be made based on experience and test results.
3. Adjust the plasma arc power
The power of plasma arc also affects the cutting speed. The higher the power, the faster the cutting speed. Therefore, while adjusting the cutting speed of the CNC plasma cutting machine, it is also necessary to adjust the plasma arc power appropriately.
4. Adjust according to the cutting quality
During the cutting process of a CNC plasma cutting machine, it is necessary to constantly observe the cutting quality. If the cutting quality is poor, the cutting speed and power can be adjusted appropriately. For example, if there are cutting burrs, it indicates that the cutting speed is too fast, and the cutting speed can be appropriately reduced.
三、 Start cutting and observe the effect

After adjusting the speed and other parameters, you can press the "Start" button to start the cutting process. During the cutting process, the cutting effect should be closely observed and fine tuned as needed. If you find that the cutting speed of the CNC plasma cutting machine is too fast or too slow, you can pause the cutting and enter the manual operation interface again for adjustment.

The cutting speed of a CNC Multi functional plasma cutting machine is an important factor affecting cutting efficiency and quality. When performing CNC plasma cutting, it is necessary to adjust the cutting speed reasonably according to factors such as material type, thickness, and plasma arc power. At the same time, it is also necessary to constantly observe the cutting quality and adjust the cutting speed and power in a timely manner to ensure the cutting effect.

If you are interested in CNC plasma cutting machines, please contact us. Obtain detailed machine parameters and quotation.